Renewable Energy and Resources

Biography

Biography: Beatriz Ruiz Camacho

Abstract

The search for new catalytic materials for direct alcohol fuel cells is the aim of this work. One of the main challenges presented by fuel cells is to have adequate catalytic material dispersed on a substrate to enhance its catalytic activity. We have synthesized by the ultrasound technique nanostructured electrocatalysts of Pt supported different carbon base substrates as i) carbon nanotubes (NTC) and ii) zeolite-carbon  composite and compared with iii) Vulcan carbon with the goal of studying the effect of the properties of the substrate on the electrical conductivity for the methanol oxidation reaction (MOR) in acid media. Particle size and metal dispersion were evaluated by transmission electron microscopy (TEM) and X-ray diffractometer (XRD) technique was used to investigate the crystalline structure. Cyclic voltammetry (CV) and chronoamperometry (CA) were performed towards the methanol oxidation reaction (MOR) in acid medium. Preliminary results show the properties of substrates as porosity, surface area and the chemical surface of substrate modified the dispersion of Pt nanoparticles as well as the interaction of metal-support which is a parameter responsible for the electrocatalytic activity. Materials synthesized catalyze the MOR, however, different onset potentials and intensity of the forward and backward oxidation peaks were obtained. The presence of zeolite on the substrate plays an important role in the oxidation of methanol. When using carbon nanotubes as a substrate, the Pt/NTC shows low stability and low intensity of the oxidation peaks. As a conclusion, the ultrasonic method allows to obtained Pt nanoparticles less of 10 nm supported on different substrates, the electrochemical activity of the materials synthesized follows the tendency Pt/zeolite-C> Pt/carbon > Pt/NTC.